Comparative evaluation of sizing of metal hydride (MH) hydrogen storage tank filled with different alloys

This study presents a comparative analysis of sizing of metal hydride tank filled with different alloys. Alloys include solid solutions and intermetallic compounds of the generic families AB₅, AB₂, AB, A₂B. The effects of the different alloys on the sizing of metal hydride hydrogen storage tanks are complicated and depend on many factors. In this paper, a thermoeconomic optimization analysis with a simple algebraic formula was presented for the estimation of optimum metal hydride tank surface area for heat transfer enhancement. The optimum area of the metal hydride tank filled with commercially available different alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) was evaluated and compared by the developed method. The optimum net savings and the value of payback were determined for four alloys. It is found that mathematical model can be employed for the determination of optimum metal hydride tank design and increasing net savings according to alloy types. The optimum areas of the tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) were calculated as 0.136, 0.130, 0.133, and 0.173 m², respectively. The optimum net savings for tanks filled with four alloys (LaN₅, Ti_0,98Zr_0,02V_0,43Fe_0,09Cr_0,05Mn_1,5, TiFe, Mg₂NiH₄) are about 461.0, 409.3, 419.6, and 979.6 $ and the values of payback are about 1.98, 2.1, 2.17, and 1.37 years, respectively. Excessive area of the metal hydride tank would not be as economical as the optimum tank area. Thermal management of metal hydride tank must be designed for optimum points calculated at which maximum savings occur.     

Evaluating the impact of uncertainty and variability on the value chain optimization of a forest biomass power plant using Monte Carlo Simulation

Mathematical programming models have been used to optimize the design and management of forest bioenergy supply chains. A deterministic mathematical model is beneficial for making optimum decisions; however, its applicability to real-world problems may be limited because it does not capture all the complexities, including uncertainties in the parameters, in the supply chain. In this paper, a combination of Monte Carlo Simulation and optimization model is used to evaluate the impact of uncertainty in biomass quality, availability and cost, and electricity prices on the supply chain of a forest biomass power plant. The optimization model is a deterministic mixed integer non-linear model with monthly time steps over a 1-year planning horizon. Variability in biomass quality, i.e. moisture content (MC) and higher heating value (HHV), based on the historical data of a real case study is studied in detail and fitted probability distributions are used in the model, while for electricity prices different scenarios are considered. The results show that the impact of variability in the MC on profit is higher than that of uncertainty in HHV. It is observed that the annual profit ranges between $13.3 million and $17.9 million in the presence of all possible uncertainties while its average is $15.5 million. Uncertainty in biomass availability and cost and electricity price results in the risks of having annual profit of less than $14 million and low monthly storage levels.     

Estimating abundance without recaptures of marked pallid sturgeon in the Mississippi River

Abundance estimates are essential for assessing the viability of populations and the risks posed by alternative management actions. An effort to estimate abundance via a repeated mark‐recapture experiment may fail to recapture marked individuals. We devised a method for obtaining lower bounds on abundance in the absence of recaptures for both panmictic and spatially structured populations. The method assumes few enough recaptures were expected to be missed by random chance. The upper Bayesian credible limit on expected recaptures allows probabilistic statements about the minimum number of individuals present in the population. We applied this method to data from a 12‐year survey of pallid sturgeon (Scaphirhynchus albus) in the lower and middle Mississippi River (U.S.A.). None of the 241 individuals marked was recaptured in the survey. After accounting for survival and movement, our model‐averaged estimate of the total abundance of pallid sturgeon ≥3 years old in the study area had a 1%, 5%, or 25% chance of being <4,600, 7,000, or 15,000, respectively. When we assumed fish were distributed in proportion to survey catch per unit effort, the farthest downstream reach in the survey hosted at least 4.5–15 fish per river kilometer (rkm), whereas the remainder of the reaches in the lower and middle Mississippi River hosted at least 2.6–8.5 fish/rkm for all model variations examined. The lower Mississippi River had an average density of pallid sturgeon ≥3 years old of at least 3.0–9.8 fish/rkm. The choice of Bayesian prior was the largest source of uncertainty we considered but did not alter the order of magnitude of lower bounds. Nil‐recapture estimates of abundance are highly uncertain and require careful communication but can deliver insights from experiments that might otherwise be considered a failure.     

绿色全要素生产率省际空间学习效应实证

当前中国资源环境约束日益凸显,依靠全要素生产率成为解决这些问题的共识。然而仅仅依靠全要素生产率不能转变生产方式,关键在于区分绿色与非绿色偏向。研究使用中国省际面板数据,运用面板与动态空间面板模型方法,对比分析绿色全要素生产率、绿色"软技术"、绿色"硬技术"的影响机制。研究发现:1依靠全要素生产率驱动发展需要区别绿色与非绿色偏向;2必须注重绿色全要素生产率对绿色发展的作用及其运行机制;3不同偏向的绿色全要素生产率的省际空间学习效应不同;4绿色"软技术"对绿色发展贡献不充分。这就意味着,在当前中国资源环境约束日趋收紧的背景下,要区别绿色与非绿色全要素生产率的不同作用,否则将不能促进生产方式转变,实现绿色可持续发展。推动绿色可持续发展,一方面需要重视提升绿色全要素生产率的作用,另一方面需要重视绿色管理技术等绿色"软技术"对绿色发展的贡献。提升绿色全要素生产率,既要重视研发投入、人力资本投入,又要考虑技术市场、劳动智力结构、劳动者年龄结构的影响。提升绿色"软技术"的贡献率,改善绿色技术效率变动的吸纳能力。通过绿色全要素生产率的省际空间学习效应,实现中国省际区域间绿色可持续协同发展。此外,在引进吸收国外先进绿色技术时,既要重视对绿色"硬技术"的吸收,又要重视对绿色"软技术"的再学习。总之,"打铁还需自身硬",中国要继续鼓励支持绿色"硬技术"自主研发,巩固提升绿色"硬技术"对绿色发展的贡献。     

Optimization-Based Atmospheric Plume Source Identification

This work applies optimization and an Eulerian inversion approach presented by Bagtzoglou and Baun in 2005 in order to reconstruct contaminant plume time histories and to identify the likely source of atmospheric contamination using data from a real test site for the first time. Present-day distribution of an atmospheric contaminant plume as well as data points reflecting the plume history allow the reconstruction and provide the plume velocity, distribution, and probable source. The method was tested to a hypothetical case and with data from the Forest Atmosphere Transfer and Storage (FACTS) experiment in the Duke experimental forest site. In the scenarios presented herein, as well as in numerous cases tested for verification purposes, the model conserved mass, successfully located the peak of the plume, and managed to capture the motion of the plume well but underestimated the contaminant peak.     

瓦斯抽采PC-CAS基封孔材料优化及其膨胀作用分析*

为了研制以硅酸盐/铝酸盐水泥、生石灰、生石膏为主的PC-CAS基封孔材料，采用正交试验优化材料配比、开展膨胀力研究，并用扫描电镜观测料-煤胶结形貌。研究结果表明:材料的最优配比为A2B2C4，其具备优良的流动性、强度及致密性，造浆量达2 100 mL/kg；PC-CAS基材料具有显著的膨胀性，其膨胀力随时间先增大而后趋于稳定，并且该膨胀力随着径向约束的提高而增大；相比于FP材料，PC-CAS基材料产生的膨胀力能够显著降低材料-煤岩界面的空隙并在一定程度上压密煤体内部的裂隙；该材料产生的膨胀力可压密封孔段围岩、提高封孔质量，并为后期“二次注浆”提供保压条件。工业试验结果表明，采用PC-CAS基材料进行封孔可显著改善抽采效果，将原有平均浓度10.11%提升至20.08%。     

基于超效率DEA模型的三峡库区生态效率评价及空间演化格局分析

本文基于2010—2017年的统计数据,首先采用超效率DEA模型对三峡库区26个区县的生态效率进行测算,然后运用空间自相关分析方法对三峡库区生态效率的演化格局进行了实证分析,探索三峡库区生态效率的时空动态演变特征。研究表明:2010—2017年三峡库区生态效率平均水平处于0.5601～1.1920,整体呈现波动性变化趋势,生态效率在一定程度上有所改善,但是整体水平仍然较低;从区域层面看,各个区县间生态效率水平不平衡,空间分布上呈现"西高东低"的非均衡性特征。局部空间自相关分析表明,三峡库区2010—2017年集聚性呈逐渐减弱态势,空间异质性逐渐增加,整体的生态效率差异变大。最后依据实证研究分析结果,本文对如何提升三峡库区生态效率提出了相应的政策建议。     

Location selection of emergency supplies repositories for emergency logistics management: A variable weighted algorithm

With the development of the city, the number of establishments that are proposed or under construction is increasing year by year, and if they are industries that handle flammable, explosive, toxic, harmful, and dangerous substances, the public safety will face great threats, which will bring great challenges to emergency rescue work. Therefore, providing reasonable solutions to the problem of location selection of emergency supplies repositories are necessary for improving the emergency response efficiency in chemical industrial parks. A mathematical model for location selection of emergency supplies repositories in emergency logistics management are presented considering more actual factors. The optimization objectives of the model are to minimize total transport length and cost. And then a Variable Weighted Algorithm is designed to solve the model, where an auxiliary function was constructed with different methods of building weighting factors based on the theory and method of solving multi-objective optimization problems in operational research. Simulation results show the effectiveness and feasibility of the models and algorithms presented in this paper.     

我国高速公路周边土壤重金属污染现状及研究进展

以我国高速公路周边土壤重金属为研究对象，综述了我国高速公路周边土壤重金属污染特征、影响因素、来源、环境风险及其研究进展。高速公路周边土壤主要受Pb、Cd、Cr、Cu、Zn等重金属污染，主要呈现指数分布、偏态分布和两者混合分布等特点，并且受到土地利用、风向、地形、车流量等多种因素的综合影响。土壤重金属的来源除了受成土母质等自然因素影响以外，公路交通和周边工农业活动也会对其来源产生较大影响。传统的土壤重金属评价方法主要采用单因子指数法、地累积指数法、生态风险评价法等对重金属的污染等级和环境风险进行评价。未来的研究应将重金属形态分析、空间和地统计分析、重金属稳定同位素示踪和源解析模型以及预测模型等多种手段相结合，开展高速公路周边土壤重金属的污染特征、时空分布、来源及预测预警研究等，为我国高速公路沿线工农业生产布局及其土壤重金属污染防控提供科学依据和决策支撑。     

基于人工神经网络的气体泄爆最大超压预测研究

为解决传统经验公式在预测气体泄爆中最大超压出现时的较大偏差或过于保守的问题，提出使用人工神经网络预测气体泄爆最大超压。基于124组实验数据，采用BP与RBF神经网络，通过优化算法计算与迭代循环对泄爆样本中的影响因素进行降维与选择，并确定2类神经网络本身在学习与计算气体泄爆样本时的相关参数。结果表明:PCA（主成分分析法）在当前样本条件下的降维效果较差，而通过迭代对比确认气体泄爆样本中的5类特征全部保留时神经网络的训练模拟效果最好；通过对124组实验数据进行随机挑选训练集与测试集的训练模拟结果发现，神经网络对气体泄爆中最大超压的预测效果较好；通过对比Molkov提出的和经Fakandu等改进的NFPA 68经验公式以及2类神经网络的预测结果表明，神经网络相比于传统气体泄爆经验公式具有明显优势。